From 592fbd3070adaf3e2c10925c2187f8180dda8a32 Mon Sep 17 00:00:00 2001 From: promptadmin Date: Sat, 6 Jun 2026 20:48:42 +0000 Subject: [PATCH] Automated ingestion of prompt: adding these development in a gasifier design tool --- ...development_in_a_gasifier_design_tool_1756.md | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 prompts/system/adding_these_development_in_a_gasifier_design_tool_1756.md diff --git a/prompts/system/adding_these_development_in_a_gasifier_design_tool_1756.md b/prompts/system/adding_these_development_in_a_gasifier_design_tool_1756.md new file mode 100644 index 0000000..b77b6d8 --- /dev/null +++ b/prompts/system/adding_these_development_in_a_gasifier_design_tool_1756.md @@ -0,0 +1,16 @@ +--- +title: "adding these development in a gasifier design tool" +contributor: "@anonymous" +tags: #system, #anonymous +--- + +Add: +1) how can we say that calculated velocity is correct and it is desired by gasifier. give remarks to check the max and min velocity and then show the criteria pass. +2) Tar loading and tar dew-point study +3) Fluidization calculation for BFB/CFB: Umf, terminal velocity, particle PSD, distributor pressure drop. +4) Oxygen safety study, inerting and purging calculation +5) Methanol synthesis gas ratio simulation and loop purge/compression study. +6) carbon conversion, turndown calculation performance, efficiency +7) I have Biomass Proximate Analysis and Ultimate analysis, how it helps +8) It must ask me which type of gasifier and when i select, it must show me detailed calculations and heat mass balance for that gasifier. +9) It must ask me comparison between which gasifiers and once i ticked, it shows that in the summary sheet only not on the front page.